manualshive.com logo in svg

Dell PowerVault MD3200i Series, Руководство пользователя, Страница: 40 / 282

Поделиться
Скачать
Dell PowerVault MD3200i Series Скачать руководство пользователя страница 40

40

Planning: MD3200i Series Storage Array Terms and Concepts

Disk groups are always created in the unconfigured capacity of a storage array. 

Unconfigured capacity is the available physical disk space not already 

assigned in the storage array.
Virtual disks are created within the free capacity of a disk group. Free capacity 

is the space in a disk group that has not been assigned to a virtual disk.

Virtual Disk States

The storage array recognizes the following virtual disk states.

RAID Levels

RAID levels determine the way in which data is written to physical disks. 

Different RAID levels provide different levels of accessibility, redundancy, and 

capacity.
Using multiple physical disks has the following advantages over using a single 

physical disk:

• Placing data on multiple physical disks (striping) allows input/output (I/O) 

operations to occur simultaneously and improve performance. 

• Storing redundant data on multiple physical disks using mirroring or parity 

supports reconstruction of lost data if an error occurs, even if that error is 

the failure of a physical disk. 

Table 4-2. RAID Controller Virtual Disk States

State

Description

Optimal

The virtual disk contains physical disks that are all online.

Degraded

The virtual disk with a redundant RAID level contains an inaccessible 

physical disk. The system can still work properly, but performance may 

be affected and additional disk failures may result in data loss.

Offline

A virtual disk with one or more member disks is in an inaccessible 

(failed, missing, or offline) state. Data on the virtual disk is no longer 

accessible.

Force online The storage array forces a virtual disk that is in an 

Offline

 state to an 

Optimal

 state. If all the member physical disks are not available, the 

storage array forces the virtual disk to a 

Degraded

 state. The storage 

array can force a virtual disk to an 

Online

 state only when a sufficient 

number of physical disks are available to support the virtual disk.

book.book  Page 40  Saturday, September 24, 2011  9:06 AM

Содержание PowerVault MD3200i Series



























































































































































































































































































Отзывы:

Нет отзывов