manualshive.com logo in svg

Dell PowerEdge T710, Руководство владельца оборудования

Поделиться
Скачать
Dell PowerEdge T710 Скачать руководство пользователя страница 62

62

Using the System Setup Program and UEFI Boot Manager

Processor Settings Screen

Option

Description

64-bit

Specifies if the processors support 64-bit extensions.

Core Speed

Displays the processor clock speed.

Bus Speed

Displays the processor bus speed.

Logical Processor 
(

Enabled 

default)

On processors that support Simultaneous Multi-
Threading (SMT) technology, each processor core 
supports up to two logical processors. If this field is set to 

Enabled

, the BIOS reports both logical processors. If set 

to 

Disabled

, only one logical processor is monitored by 

the BIOS.

Virtualization Technology
(

Disabled 

default)

NOTE: 

Disable this feature if your system will not be 

running virtualization software.

Enabled permits virtualization software to use the 
virtualization technology incorporated in the processor. 

Execute Disable
(

Enabled 

default)

Enables or disables execute disable memory protection 
technology.

Number of Cores per 
Processor 
(

All 

default)

If set to 

All

, the maximum number of cores in each 

processor is enabled. 

Turbo Mode
(

Enabled 

default)

If Turbo Boost Technology is supported by the 
processor(s), enables or disables 

Turbo Mode

.

C States
(

Enabled 

default)

When set to 

Enabled

, the processor(s) can operate in all 

available power states.

Processor 1 Family -Model-
Stepping

Displays the family, model and stepping of the selected 
processor.

book.book  Page 62  Monday, June 15, 2009  11:33 AM

Содержание PowerEdge T710























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды