Dell PowerEdge T710, Руководство владельца оборудования

Страница: 180 / 214

180
Troubleshooting Your System
9
Run the appropriate online diagnostic test.
If your system only has one processor and a problem is still indicated, see
"Getting Help " on page 193 .
10
For systems with multiple processors, turn off the system and attached
peripherals, and disconnect the system from the electrical outlet.
11
Open the system. See "Opening the System" on page 85.
12
Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 87.
13
Remove all processors except for processor 1. See "Removing a Processor"
on page 107.
14
Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 88.
15
Close the system. See "Closing the System" on page 86.
16
Place the system upright and on its feet on a flat and stable surface,
reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
17
Run the appropriate online diagnostic test.
If the test fails, the processor is faulty. S ee "Getting Help " on page 193 .
18
Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
19
Open the system. See "Opening the System" on page 85.
20
Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 87.
21
Replace processor 1 with processor 2. See "Processors" on page 107.
22
Repeat step 15 through step 17.
If your system has more than two processors, continue installing and
testing each processor in the processor 1 slot until you determine the
faulty processor, and then replace the faulty processor. See
"Getting Help "
on page 193 .
If you have tested all the processors and the problem persists, the system
board is faulty.
S ee "Getting Help " on page 193 .
book.book Page 180 Monday, June 15, 2009 11:33 AM