Dell PowerEdge R300, Руководство владельца оборудования

Страница: 107 / 186

Installing System Components
107
Removing Memory Modules
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1
Open the system. See "Opening and Closing the System" on page 70.
2
If applicable, disconnect the SAS cable on the installed expansion card,
and then remove the system board shroud before proceeding to step 3. See
Figure 3-5.
3
Locate the memory module sockets. See Figure 6-1.
4
Press down and out on the ejectors on each end of the socket until the
memory module pops out of the socket. See Figure 3-18.
5
Replace the system board shroud and connect the SAS connector to the
installed expansion card, and then route the cable through the slot
between the shroud and the system sidewall. See Figure 3-5.
6
Close the system. See "Opening and Closing the System" on page 70.
Processor
You can upgrade the processor to take advantage of future options in speed
and functionality. The processor and its associated internal cache memory are
contained in a land grid array (LGA) package that is installed in a ZIF socket
on the system board.
Replacing the Processor
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1
Prior to upgrading your system, download the latest system BIOS version
on
support.dell.com .
book.book Page 107 Sunday, June 21, 2009 5:16 PM