1.
Ensure that you follow the
.
2.
Follow the procedure listed in
Before working inside your system
.
Steps
1.
Align the guide on the cooling shroud with the guide pin on the chassis wall.
2.
Lower the cooling shroud into the chassis until it is firmly seated.
When firmly seated, the memory socket numbers marked on the cooling shroud align with the respective memory sockets.
Figure 22. Installing the cooling shroud
1.
cooling shroud
2.
guide on the cooling shroud
3.
guide pin on the chassis wall
Next steps
Follow the procedure listed in
After working inside your system
System memory
Your system supports DDR4 ECC unbuffered DIMMs (UDIMMs).
NOTE: MT/s indicates memory module speed in Mega Transfers per second.
Memory bus operating frequency can be 1600 MT/s, 1866 MT/s, 2133 MT/s, or 2400 MT/s depending on the following factors:
•
System profile selected (for example, Performance Optimized, Custom, or Dense Configuration Optimized)
•
Maximum supported memory module frequency of the processors
The system contains four memory sockets — two sets of 2–sockets each. Each 2–socket set is organized into one channel. In each
2-socket set, the first socket release lever is marked white and the second socket release lever is marked black.
60
Содержание PowerEdge R230
Страница 1: ...Dell PowerEdge R330 Owner s Manual Regulatory Model E34S Series Regulatory Type E34S001 ...
Страница 8: ...Documentation feedback 164 Accessing system information by using QRL 164 8 ...
Страница 10: ...Supported configurations on PowerEdge R330 systems Figure 1 System view with supported configurations 10 ...
Страница 165: ...165 ...
