manualshive.com logo in svg

Dell PowerEdge R230, Руководство пользователя

Поделиться
Скачать
Dell PowerEdge R230 Скачать руководство пользователя страница 18

3.

Hard drive

NOTE: If the hard drive is in the Advanced Host Controller Interface (AHCI) mode, the status indicator (on the right side) 
does not turn on.

Table 6. Hard drive indicator codes

Drive-status indicator pattern

Condition

Flashes green twice per second

Identifying drive or preparing for removal.

Off

Drive ready for insertion or removal. 

NOTE: The drive status indicator remains off until all hard 
drives are initialized after the system is turned on. Drives are 
not ready for insertion or removal during this time.

Flashes green, amber, and then turns off

Predicted drive failure

Flashes amber four times per second

Drive failed

Flashes green slowly

Drive rebuilding

Steady green

Drive online

Flashes green for three seconds, amber for three seconds, 
and then turns off after six seconds

Rebuild stopped

NIC indicator codes

The NIC on the back panel has an indicator that provides information about the network activity and link status. The activity LED 
indicates whether the NIC is currently connected or not. The link LED indicates the speed of the connected network.

Figure 8. NIC indicators

1.

link indicator

2.

activity indicator

Table 7. NIC indicators

Convention

Status

Condition

A

Link and activity indicators are off

The NIC is not connected to the network.

B

Link indicator is green

The NIC is connected to a valid network at its maximum 
port speed (1 Gbps or 10 Gbps).

18

Содержание PowerEdge R230






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды