manualshive.com logo in svg

Dell PowerEdge R230, Руководство пользователя

Поделиться
Скачать
Dell PowerEdge R230 Скачать руководство пользователя страница 49

6

Installing and removing system components

Safety instructions

WARNING: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the 
system by yourself.

WARNING: Opening or removing the system cover while the system is powered on may expose you to a risk of electric 
shock.

CAUTION: Do not operate the system without the cover for a duration exceeding five minutes.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and 
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support 
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety 
instructions that are shipped with your product.

NOTE: Dell recommends that you always use a static mat and static strap while working on components inside the 
system.

NOTE: To ensure proper operation and cooling, all bays in the system and system fans must be populated always with 
either a component or with a blank.

Before working inside your system

1.

Ensure that you follow the 

Safety instructions

.

2.

Turn off the system, including any attached peripherals.

3.

Disconnect the system from the electrical outlet and disconnect the peripherals.

4.

If applicable, remove the system from the rack. For more information, see the 

Rack Installation

 placemat at 

Dell.com/

poweredgemanuals

.

5.

If installed, remove the front bezel.

6.

Remove the system cover.

Related links

Removing the optional front bezel
Removing the system cover

After working inside your system

Prerequisites

Follow the safety guidelines listed in the Safety instructions section.

Steps
1.

Install the system cover.

2.

If applicable, install the system into the rack.
For more information, see the 

Rack Installation

 placemat at 

Dell.com/poweredgemanuals

.

3.

If removed, install the front bezel.

4.

Reconnect the peripherals and connect the system to the electrical outlet.

5.

Turn on the system, including any attached peripherals.

49

Содержание PowerEdge R230






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды