manualshive.com logo in svg

Dell PowerEdge R230, Руководство пользователя

Поделиться
Скачать
Dell PowerEdge R230 Скачать руководство пользователя страница 39

Option

Description

Option

Description

Capacity

Specifies the total capacity of the hard drive. This field is undefined for removable 
media devices such as optical drives.

Boot Settings details

The

 Boot Settings

 screen details are explained as follows:

Option

Description

Boot Mode

Enables you to set the boot mode of the system.

CAUTION: Switching the boot mode may prevent the system from booting if the operating system 
is not installed in the same boot mode.

If the operating system supports UEFI, you can set this option to 

UEFI

. Setting this field to 

BIOS

 allows 

compatibility with non-UEFI operating systems. This option is set to 

BIOS

 by default.

NOTE: Setting this field to UEFI disables the BIOS Boot Settings menu. Setting this field to BIOS 
disables the UEFI Boot Settings menu.

Boot Sequence 
Retry

Enables or disables the Boot Sequence Retry feature. If this option is set to 

Enabled

 and the system fails to 

boot, the system reattempts the boot sequence after 30 seconds. This option is set to 

Enabled

 by default.

Hard-Disk Failover

Specifies the hard drive that is booted in the event of a hard drive failure. The devices are selected in the 

Hard-Disk Drive Sequence

 on the

 Boot Option Setting

 menu. When this option is set to 

Disabled

, only the 

first hard drive in the list is attempted to boot. When this option is set to 

Enabled

, all hard drives are 

attempted to boot in the order selected in the 

Hard-Disk Drive Sequence

. This option is not enabled for 

UEFI Boot Mode.

Boot Option 
Settings

Configures the boot sequence and the boot devices.

BIOS Boot Settings

Enables or disables BIOS boot options.

NOTE: This option is enabled only if the boot mode is BIOS.

UEFI Boot Settings

Enables or disables UEFI Boot options. The Boot options include 

IPv4 PXE

 and 

IPv6 PXE

. This option is set 

to 

IPv4

 by default.

NOTE: This option is enabled only if the boot mode is UEFI.

Network Settings screen details

The 

Network Settings

 screen details are explained as follows:

Option

Description

PXE Device n

 (n = 1 

to 4)

Enables or disables the device. When enabled, a UEFI boot option is created for the device.

PXE Device n 
Settings

(n = 1 to 4)

Enables you to control the configuration of the PXE device.

39

Содержание PowerEdge R230






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды