Dell POWEREDGE 4300 Скачать руководство пользователя страница 116

Страница: 116 / 217

7-28

Dell PowerEdge 4300 Systems Installation and Troubleshooting Guide

16. Disconnect the keyboard and reboot the system.

Does the system boot successfully to the operating system?

Yes.

Go to step 17.

No.

See Chapter 11, “Getting Help,” for instructions on obtaining technical

assistance.

17. Swap the keyboard with a comparable working keyboard and run the

System Set

test group again.

Did the tests run successfully?

Yes.

You have fixed the problem.

No.

See Chapter 11, “Getting Help,” for instructions on obtaining technical

assistance.

7URXEOHVKRRWLQJWKH'LVNHWWH'ULYH

6XEV\VWHP

If the monitor displays a system error message indicating a diskette drive problem
during execution of either the boot routine or the Dell Diagnostics, the problem may
be caused by any of the following conditions:

The system configuration settings do not match the physical diskette subsystem
configuration.

The diskette drive cable is not properly connected or is faulty.

An expansion card is interfering with proper drive operations.

A diskette drive may be improperly configured.

The diskette drive is faulty.

The computer’s power supply is not providing sufficient power for the drives.

The computer’s diskette drive logic is faulty.

Follow these steps to troubleshoot the diskette drive subsystem:

Enter the System Setup program, and verify that the system is configured cor-
rectly for the

Diskette Drive A

setting.

See Chapter 4, “Using the System Setup Program,” in the

User’s Guide for

instructions.

If the system configuration settings are incorrect, make the necessary correc-
tions in the System Setup program, and then reboot the system.

Run the

Diskette Drives

test group in the Dell Diagnostics to see whether the

diskette drive subsystem now works correctly.

See Chapter 5, “Running the Dell Diagnostics,” for more information.

Содержание POWEREDGE 4300


























































































































































































































Результаты поиска

Содержание POWEREDGE 4300

Отзывы:

Dell POWEREDGE 4300, Инструкция по установке и устранению неисправностей, Страница: 116 / 217

Результаты поиска

Содержание POWEREDGE 4300

Отзывы: