Dell POWEREDGE 4300, Инструкция по установке и устранению неисправностей

Страница: 111 / 217

Checking Inside the Computer 7-23
15. Repeat step 12 for each of the remaining expansion cards that you removed in
step 9.
Have you reinstalled all of the expansion cards without encountering a test
failure?
Yes.
You have fixed the problem.
No. See Chapter 11, “Getting Help,” for information on obtaining technical
assistance.
7URXEOHVKRRWLQJ6\VWHP0HPRU\
A system memory problem can be a faulty dual in-line memory module (DIMM) or a
faulty system board. If a random-access memory (RAM) error message appears, the
system probably has a memory problem.
When you turn on or reboot the system, the Caps Lock and Scroll Lock indicators on
the keyboard should flash momentarily and then turn off. If
Num Lock in the System
Setup program is set to On , the Num Lock indicator should flash momentarily and
then remain on; otherwise, it should turn off. Abnormal operation of these indicators
can result from a defective DIMM in socket DIMM_A.
Follow these steps to troubleshoot system memory:
1. Turn on the system, including any attached peripherals.
Is there an error message indicating invalid system configuration information
after the memory count is completed?
Yes. Go to step 2.
No. Go to step 10.
2. Enter the System Setup program and check the System Memory setting.
See Chapter 4, “Using the System Setup Program,” in the
User’s Guide for
instructions.
Does the amount of memory installed match the System Memory setting?
Yes.
Go to step 10.
No. Go to step 3.
3. Turn off the system, including any attached peripherals, and disconnect the
power cable from the electrical outlet.
&$87,216HH´3URWHFWLQJ$JDLQVW(OHFWURVWDWLF'LVFKDUJHµLQWKHVDIHW\
LQVWUXFWLRQVDWWKHIURQWRIWKLVJXLGH
4. Remove the computer cover.
See “Removing the Computer Cover” found earlier in this chapter.