manualshive.com logo in svg

Dell PowerEdge 1800, Инструкция по установке и устранению неисправностей

Поделиться
Скачать
Dell PowerEdge 1800 Скачать руководство пользователя страница 19

Indicators, Codes, and Messages

19

Figure 2-7.

SCSI Hard-Drive Indicators

Table 2-6 lists the drive status indicator codes. Different codes display as drive events occur in the 
system. For example, in the event of a hard-drive failure, the "drive fail" code appears. After the 
drive is selected for removal, the "preparing for removal" code appears. After the replacement drive 
is installed, the "preparing for operation, drive online" code appears.
The drive-busy indicator signifies whether the hard drive is active on the SCSI bus. The indicator is 
controlled by the hard drive.

Table 2-6.

SCSI Hard-Drive Status Indicator Codes

Drive-Status Indicator

Indicator Code

Drive bay empty

Off

Drive being prepared for operation, 
drive online

Steady green

Drive being identified or prepared for 
removal 

Blinks green three times per second at equal intervals

Drive rebuilding

Blinks green once per second

Drive offline or failed

Steady amber

green drive-activity 
indicator

drive-status indicator 
(green and amber)

Содержание PowerEdge 1800

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды