Dell PowerConnect M6348, Руководство по началу работы

Страница: 18 / 208

16
Getting Started Guide
www
.dell.com | support.dell.com
Advanced Configuration
This section provides summary information about such common tasks as:
• Retrieving an IP Address From a DHCP Server
• Security Management and Password Configuration
NOTE:
For detailed information on all the CLI commands available for the 8024 and 8024F M6348
switches, see the CLI Reference Guide .
Retrieving an IP Address From a DHCP Server
When using the DHCP protocol to retrieve an IP address, the switch acts as a DHCP client.
To retrieve an IP address from a DHCP server, perform the following steps:
1
Select and connect any port to a DHCP server or to a subnet that has a DHCP server on it,
in order to retrieve the IP address.
NOTE:
You do not need to delete the switch configuration to retrieve an IP address for the D HCP server.
2
Enter the following commands to use the selected port for receiving the IP address.
console# config
console(config)# ip address dhcp
The interface receives the IP address automatically.
3
To verify the IP address, enter the show ip interface command at the system prompt as shown
in the following example.
console# show ip interface
Management Interface:
IP Address....................................... 10.240.4.125
Subnet Mask..................................... 255.255.255.0
Default Gateway.................................... 10.240.4.1
Burned In MAC Address........................00:10:18:82:04:35
Network Configuration Protocol Current................... DHCP
Management VLAN ID.......................................... 1