Dell PE R720XD Скачать руководство пользователя страница 17

Страница: 17 / 157

Figure 8. Back-Panel Features and Indicators—PowerEdge R720xd

Item

Indicator, Button, or

Connector

Icon

Description

System identification button

The identification buttons on the front and back panels
can be used to locate a particular system within a rack.

PowerEdge
R720

When one of these buttons is pressed,
the LCD panel on the front and the
system status indicator on the back
flashes until one of the buttons is
pressed again.

PowerEdge
R720xd

When one of these buttons is pressed,
the system status indicator on the back
flashes until one of the buttons is
pressed again.

Press to toggle the system ID on and off.
If the system stops responding during POST, press and

hold the system ID button for more than five seconds to

enter BIOS progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup) press

and hold the button for more than 15 seconds.

System identification
connector

Connects the optional system status indicator assembly
through the optional cable management arm.

iDRAC7 Enterprise port

Dedicated management port.

NOTE: The port is available for use only if the iDRAC7
Enterprise license is installed on your system.

PCIe expansion card slots
low–profile (3)

Allows you to connect up to three PCI Express expansion
cards.

Serial connector

Allows you to connect a serial device to the system.

Video connector

Allows you to connect a VGA display to the system.

USB connectors (2)

Allows you to connect USB devices to the system. The
ports are USB 2.0-compliant.

Ethernet connectors

Four integrated 10/100/1000 Mbps NIC connectors
or
Four integrated connectors that include:

•

Two 10/100/1000 Mbps NIC connectors

Содержание PE R720XD






























































































































































Результаты поиска

Содержание PE R720XD

Отзывы:

Похожие инструкции для PE R720XD

Бренды по названию

Популярные бренды

Dell PE R720XD, Руководство пользователя

Результаты поиска

Содержание PE R720XD

Отзывы:

Похожие инструкции для PE R720XD

Бренды по названию

Популярные бренды