manualshive.com logo in svg

Dell PE R720XD, Руководство пользователя, Страница: 15 / 157

Поделиться
Скачать
Dell PE R720XD Скачать руководство пользователя страница 15

Electrical indicator

Condition

Corrective Action

example, voltage out of range, or a failed 
power supply or voltage regulator).

LED on the power supply. Re-seat the power supply by removing 
and reinstalling it. If the problem persists, see 

Getting Help

.

Temperature indicator

Condition

Corrective Action

The indicator blinks amber if the 
system experiences a thermal error 
(for example, a temperature out of 
range or fan failure).

Ensure that none of the following conditions exist:

* A cooling fan is removed or has failed.
* System cover, cooling shroud, EMI filler panel, memory-

module blank, or back-filler bracket is removed.

* Ambient temperature is too high.
* External airflow is obstructed.

See 

Getting Help

.

Memory indicator

Condition

Corrective Action

The indicator blinks amber if a 
memory error occurs.

See the system event log or system messages for the location of the failed 
memory. Reinstall the memory device. If the problem persists, see 

Getting 

Help

.

PCIe indicator

Condition

Corrective Action

The indicator blinks amber if a PCIe card 
experiences an error.

Restart the system. Update any required drivers for the PCIe card. 
Re-install the card. If the problem persists, see 

Getting Help

.

15

Содержание PE R720XD






























































































































































Отзывы:

Нет отзывов