Dell PE R720XD Скачать руководство пользователя страница 147

Страница: 147 / 157

Error Code Message Information

Action

Check the memory configuration. Re-seat the memory modules. If the issue persists,
see

Getting Help

MEM0701

Message Correctable memory error rate exceeded for <

location

Details

The memory may not be operational. This an early indicator of a possible future
uncorrectable error.

Action

Re-seat the memory modules. If the issue persists, see

Getting Help

MEM0702

Message

Correctable memory error rate exceeded for <

location

LCD Message Correctable memory error rate exceeded for <

location

>. Re-seat memory.

Details

The memory may not be operational. This an early indicator of a possible future
uncorrectable error.

Action

Re-seat the memory modules. If the issue persists, see

Getting Help

MEM1205

Message

Memory mirror redundancy is lost. Check memory device at location(s) <

location

LCD Message Memory mirror lost on <

location

>. Power cycle system.

Details

The memory may not be seated correctly, misconfigured, or has failed.

Action

Check the memory configuration. Re-seat the memory modules. If the issue persists,
see

Getting Help

MEM1208

Message

Memory spare redundancy is lost. Check memory device at location <

location

LCD Message

Memory spare lost on <

location

>. Power cycle system.

Details

Memory sparing is no longer available.

Action

Re-seat the memory modules. If the issue persists, see

Getting Help

MEM8000

Message

Correctable memory error logging disabled for a memory device at location <

location

LCD Message SBE log disabled on <

location

>. Re-seat memory.

Details

Errors are being corrected but no longer logged.

Action

Review system logs for memory exceptions. Reinstall memory at location <

location

PCI1302

Message A bus time-out was detected on a component at bus <

bus

> device<

device

> function <

func

Details

System performance may be degraded. The device has failed to respond to a transaction.

Action

Cycle input power, update component drivers, if device is removable, reinstall the device.

PCI1304

Message

An I/O channel check error was detected.

LCD Message I/O channel check error detected. Power cycle system.

147

Содержание PE R720XD






























































































































































Результаты поиска

Содержание PE R720XD

Отзывы:

Похожие инструкции для PE R720XD

Бренды по названию

Популярные бренды

Dell PE R720XD, Руководство пользователя

Результаты поиска

Содержание PE R720XD

Отзывы:

Похожие инструкции для PE R720XD

Бренды по названию

Популярные бренды