4. Disassembly and Assembly Procedures
S9
S11
S12
S8
Unplug the panel power cable from the connector of
the panel module, then release the cable from the
panel by tearing off the adhesive tape.
Move up the bracket chassis module , tear off the
adhesive tape for release the LVDS cable, then push
the ear lock, and remove the LVDS cables from the
connectors of LCD panel module.
Take away the
and then put
the bracket chassis module on a protective cushion.
bracket chassis module
(Note: you must stick a piece of mylar when you
change a new panel.)
Lift up the panel module with the bracket for
removing the front bezel with function key board,
and then release the function key board from the
hooks of the front bezel. Put the panel with bracket
chassis on a protect cushion.
S13
S10
Use a Hex-head screwdriver to remove two screws
for unlocking the D-Sub connector.
(No.1~2 screws size=M3x8, Torque=6
±0.5
kgfxcm)
( No.3~4 screw size=M3x8, Torque=6~7kgfxcm)
Use a Philips-head screwdriver to remove
screws for unlocking the AC power outlet.
two
Turn over the bracket chassis. Use a Philips-head
screwdriver to remove six screws for unlocking the
circuit board, release all the cables from the hooks.
(No.1 screw size=M4x8, Torque=6
±
0.5kgfxcm;
No.2~6 screw size=M3x7.5, Torque=6
±
0.5kgfxcm)
1
2
3
5
6
4
2
1
4
3
