background image

  4. Disassembly and Assembly Procedures

S2

 

4

.1  Disassembly Procedures:

S1

S3

S6

S5

S4

Remove the monitor stand base: 

1. Place the monitor on a soft cloth or cushion.

2. Press and hold the stand-release button. 

3. Lift the stand up and away from the monitor. 

Use a Philips-head screwdriver to remove 4pcs

screws for unlocking mechanisms. Remove DP cap.

(No.1~4 screw size=M4x10; Torque=12

±

0.5kgfxcm)

2

3

Turn over the LCD monitor to let the screen faced

up, place a cloth on the panel where you are working 

on to protect the panel. Continually, then wedge your 

fingers between the front bezel and the panel for 

unlocking mechanisms.

Turn over the LCD monitor to let the screen faced 

down and then turn on the rear cover carefully. 

Disconnect the USB FFC cable from the connector 

of the interface board, and then remove the rear 

cover.

1

top side

bottom side

2

2

3

2

3

4

1

Tear off two pieces of the aluminium foils and PVC 

tape for unfixing the bracket chassis base

.

Use a proper tool to release the function key cable 

from the connector, then pull the function key cable 

high for unsticking two positions with glue and 

release the function key cable.

Use a Philips-head screwdriver to remove one screw 

for unlocking the USB board unit, then release the 

USB board unit and put it aside.

(No.1 screw size=M3x6, Torque=4

±

0.5

kgfxcm)

aluminium foil 

1

S7

Necessary repair and test equipment:
1.  Philips-head screwdriver
2.  Hex-head screwdriver

Содержание P2217
















Отзывы: