Dell P110F, Руководство по обслуживанию

Страница: 56 / 111

Next steps
1. Install the 3-cell battery or the 4-cell battery , whichever applicable.
2. Install the base cover .
3. Follow the procedure in After working inside your computer .
Tweeter speakers
Removing the tweeter speakers
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
3. Remove the thermal module .
About this task
NOTE: This procedure applies only to computers shipped with WLAN-antennas installed in the display assembly.
The following images indicate the location of the tweeter speakers and provide a visual representation of the removal procedure.
Steps
1. Remove the screw (M2x2) that secures the WLAN bracket to the system board.
2. Remove the WLAN bracket from the system board.
3. Disconnect and unroute the WLAN-antenna cables from the respective connectors on the system board.
4. Remove the two screws (M2x2) that secure the display-cable bracket to the system board.
5. Remove the display-cable bracket from the system board.
6. Peel back the tape that secures the display cable to the system board.
56 Removing and installing components