Dell OptiPlex G1, Справочное и монтажное руководство, Страница: 63 / 164

Using the ISA Configuration Utility 3-7
,I\RXZDQWWKH,&8WRVHOHFWWKHUHVRXUFHVIRUWKHFDUGFOLFN2.2WKHU
ZLVHVNLSWRVWHS
The ICU uses the default resources set by the card manufacturer whenever pos-
sible. If the ICU cannot find a resource that is valid for the card and available in
the system, the utility generates an error message. See Appendix B, “ISA Config-
uration Utility Messages,” for an explanation of the message and a possible
solution to the conflict.
If you are satisfied with the default resources assigned to the card, you can skip
the remainder of this procedure.
7RVHOHFWWKHUHVRXUFHV\RXUVHOIFOLFN$GYDQFHG
The Card Configuration dialog box (see Figure 3-3) displays all resources used by
the card. Some cards have multiple functions, each having one or more resources
associated with it. For example, a communications card can have fax, modem,
and scanner functions, each of which may have one or more associated
resources.
)LJXUH&DUG&RQILJXUDWLRQ'LDORJ%R[
7RFKDQJHDQ\RIWKHUHVRXUFHVHWWLQJVIRUWKHFDUGVHOHFWWKHUHVRXUFH
VHWWLQJDQGWKHQFOLFN6HWWLQJV
The Configuration Settings dialog box (see Figure 3-4) displays the name of the
resource that you selected in the upper-left corner of the box. The resource
values currently associated with the selected function are displayed in the
Resources for Choice box. The resource values displayed are IRQ, DMA, Mem-
ory (Hex), and I/O Port (Hex).
)LJXUH&RQILJXUDWLRQ6HWWLQJV'LDORJ%R[IRU$VVLJQLQJDQ
,54/LQH