
Back to Contents Page
Operating System Drivers
Within the operating system, the AMT Unified driver must be installed to remove unknown devices in the Device Manager. The
driver is discussed below. Unlike previous versions (3, 4, or 5) where there were two separate
HECI
and
LMS/SOL
drivers
from customer re-install stand-point, the current version provides both drivers in a common package called
AMT Unified
Driver
. When the unified driver package is installed, it manages both PCI devices in the Device Manager.
AMT Unified Driver
The Intel
®
AMT Serial-Over-LAN (SOL) / Local Manageability Service (LMS) driver is available on
support.dell.com
and on
the ResourceCD under
Chipset Drivers
. The driver is labeled
Intel AMT SOL/LMS
. Once the driver is obtained, execute the
file; it unzips and prompts the user to continue the installation process.
Once you install the SOL/LMS driver, the
PCI Serial Port
entry becomes the
Intel Active Management Technology - SOL
(COM3)
entry.
HECI Driver
The Intel AMT Host Embedded Controller Interface (HECI) driver is available on
support.dell.com
and on the ResourceCD
under
Chipset Drivers
. The driver is labeled
Intel AMT HECI
. Once the driver is obtained, execute the file; it unzips and
prompts the user to continue the installation process.
Once you install the HECI drivers, the
PCI Simple Communications Controller
entry becomes the
Intel Management
Engine Interface
entry.
Back to Contents Page
Содержание OptiPlex 980 - Desktop
