NOTE:
For a processor greater than 150 W, you need to use high performance heat sink and processor module.
1. Follow the safety guidelines listed in
on page 27.
2. Follow the procedure listed in
Before working inside your system
3.
.
Steps
1. Using a Torx #T30 screwdriver, loosen the screws on the heat sink in the order below:
a. Loosen the first screw three turns.
b. Loosen the second screw completely.
c. Return to the first screw and loosen it completely.
2. Pushing both blue retention clips simultaneously, lift the processor and heat sink module (PHM).
3. Set the PHM aside with the processor side facing up.
Figure 65. Removing the processor and heat sink module
Next steps
1.
.
80
Installing and removing system components
Содержание Olympus O-T600
