Dell Olympus O-T600, Инструкция по установке и обслуживанию

Страница: 13 / 136

Table 1. Status LED indicators and descriptions (continued)
Icon Description Condition Corrective action
a memory error
occurs.
If the problem persists, see Getting help .
Electrical
indicator The indicator
turns solid amber
if the system
experiences an
electrical error (for
example, voltage
out of range, or a
failed power supply
unit (PSU) or
voltage regulator). Check the System Event Log or system messages for the specific
issue. If it is due to a problem with the PSU, check the LED on the
PSU. Reseat the PSU.
If the problem persists, see Getting help .
Temperature
indicator The indicator
turns solid amber
if the system
experiences a
thermal error
(for example,
the ambient
temperature is out
of range or there is
a fan failure). Ensure that none of the following conditions exist:
● A cooling fan has been removed or has failed.
● System cover, air shroud, memory module blank, or back filler
bracket is removed.
● Ambient temperature is too high.
● External airflow is obstructed.
If the problem persists, see Getting help .
Drive
indicator The indicator turns
solid amber if there
is a drive error. ● Check the System Event Log to determine if the drive has an
error.
● Run the appropriate Online Diagnostics test. Restart the system
and run embedded diagnostics (ePSA).
● If the drives are configured in a RAID array, restart the system,
and enter the host adapter configuration utility program.
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC
subsystem.
You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet.
The following table describes iDRAC Direct activity when the iDRAC Direct port is active:
Table 2. iDRAC Direct LED indicator codes
iDRAC Direct LED
indicator code
Condition
Solid green for two
seconds
Indicates that the laptop or tablet is connected.
Flashing green (on for
two seconds and off for
two seconds) Indicates that the laptop or tablet connected is recognized.
Turns off Indicates that the laptop or tablet is unplugged.
12 Dell EMC PowerEdge T640 overview