Dell NX3230 Скачать руководство пользователя страница 30

Страница: 30 / 150

Menu Item

Description

PXE Device n

(n = 1 to 4)

Enables or disables the device. When enabled, a UEFI boot option is
created for the device.

PXE Device n Settings

(n = 1

to 4)

Allows you to control the configuration of the PXE device.

Integrated Devices screen details

You can use the

Integrated Devices

screen to view and configure the settings of all integrated devices

including the video controller, integrated RAID controller, and the USB ports.
You can view the

Integrated Devices

screen by clicking

System Setup Main Menu

→

System BIOS

→

Integrated Devices

The

Integrated Devices

screen details are explained here.

Menu Item

Description

USB 3.0 Setting

Enables or disables the USB 3.0 support. Enable this option only if your OS
supports USB 3.0. If you disable this option, devices operate at USB 2.0 speed.
USB 3.0 is disabled by default.

User Accessible USB
Ports

Enables or disables the USB ports. Selecting

Only Back Ports On

disables the

front USB ports, selecting

All Ports Off

disables all USB ports. The USB

keyboard and mouse operates during boot process in certain OSs. After the

boot process is complete, the USB drive and mouse do not work if the ports
are disabled.

NOTE: Selecting

Only Back Ports On

and

All Ports Off

will disable the

USB management port and also restrict access to iDRAC features.

Internal USB Port

Enables or disables the internal USB port. By default, the option is set to

Enabled

Integrated RAID

Controller

Enables or disables the integrated RAID controller. By default, the option is

set to

Enabled

Integrated Network

Card 1

Enables or disables the integrated network card.

Embedded NIC1 and

NIC2

NOTE: The Embedded NIC1 and NIC2 option is only available on

systems that do not have

Integrated Network Card 1

Enables or disables the Embedded NIC1 and NIC2 . If set to

Disabled

, the NIC

may still be available for shared network access by the embedded

management controller. The embedded NIC1 and NIC2 option is only
available on systems that do not have NDCs. This option is mutually exclusive

with the Integrated Network Card 1 option. Configure this function using the
NIC management utilities of the system.

I/OAT DMA Engine

Enables or disables the I/OAT option. Enable only if the hardware and

software support the feature.

Embedded Video

Controller

Enables or disables the

Embedded Video Controller

. By default, the

embedded video controller is

Enabled

Current state of Embedded Video

Controller

Enabled

Current State of Embedded Video Controller

is a read

only field, indicating the current state for the Embedded Video Controller. If

the Embedded Video Controller is the only display capability in the system
(that is, no add-in graphics card is installed), then the Embedded Video

Содержание NX3230























































































































































Результаты поиска

Содержание NX3230

Отзывы:

Похожие инструкции для NX3230

Бренды по названию

Популярные бренды

Dell NX3230, Руководство пользователя

Результаты поиска

Содержание NX3230

Отзывы:

Похожие инструкции для NX3230

Бренды по названию

Популярные бренды