Dell NX3230, Руководство пользователя

Страница: 99 / 150

Figure 43. Removing and installing an AC PSU unit
1. release latch 2. PSU cable connector
3. PSU 4. connector
5. PSU handle
Installing AC PSU
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1.
Verify that both the PSUs are the same type and have the same maximum output power.
NOTE: The maximum output power (shown in watts) is listed on the PSU label.
2. If applicable, remove the PSU blank.
3. Slide the new PSU into the chassis until the PSU is fully seated and the release latch snaps into place.
NOTE: If you unlatched the cable management arm, re-latch it. For information about the cable
management arm, see the system’s rack documentation.
4. Connect the power cable to the PSU and plug the cable into a power outlet.
CAUTION: When connecting the power cable, secure the cable with the strap.
99