Back to Removing and Replacing Parts
SD Card Reader
Dell™ Latitude™ E6410/E6410 ATG Service Manual
Removing the SD Card Reader
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
ATG Port Cover
(applicable on E6410 ATG computer only).
3.
Remove the
battery
4.
Remove the
Memory
.
5.
Remove the
ExpressCard
.
6.
Remove the
optical drive
7.
Remove the
hard drive
8.
Remove the
hinge covers
9.
Remove the
access panel
10.
Remove the
Latitude ON™ Flash/CMG Module
.
11.
Remove the
WWAN card
.
12.
Remove the
WLAN card
.
13.
Remove the
coin-cell battery
.
14.
Remove the
LED cover
15.
Remove the
keyboard
16.
Remove the
fingerprint reader
.
17.
Remove the
display assembly
.
18.
Remove the
ExpressCard cage
.
19.
Remove the
system board
.
20.
Disconnect the SD card reader cable from the system board.
21.
Lift the 2 hooks while pulling the smart card reader to the right of the computer.
22.
Remove the smart card reader from the computer.
Replacing the SD Card Reader
To replace the SD card reader, perform the above steps in reverse order.
Back to Removing and Replacing Parts
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe
®
Flash
®
Player from
Adobe.com
in order to view the illustrations below.
Содержание Latitude E6410
Страница 6: ...Back to Contents Page ...