Back to Removing and Replacing Parts
ExpressCard Cage
Dell™ Latitude™ E6410/E6410 ATG Service Manual
Removing the ExpressCard Cage
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
ATG Port Cover
(applicable on E6410 ATG computer only).
3.
Remove the
battery
.
4.
Remove the
Memory Card
.
5.
Remove the
ExpressCard
.
6.
Remove the
access panel
.
7.
Remove the
hinge covers
.
8.
Remove the
LED cover
.
9.
Remove the
keyboard
10.
Remove the
hard drive
.
11.
Remove the
fingerprint reader
.
12.
Remove the
Heat Sink and Processor fan
.
13.
Remove the
display assembly
.
14.
Remove the
palm rest
.
15.
Remove the screws that secures the ExpressCard cage to the computer.
16.
Lift the ExpressCard cage and slide the ExpressCard cage out of the computer.
Replacing the ExpressCard Cage
To replace the ExpressCard cage, perform the above steps in reverse order.
Back to Removing and Replacing Parts
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe
®
Flash
®
Player from
Adobe.com
in order to view the illustrations below.
Содержание Latitude E6410
Страница 6: ...Back to Contents Page ...