Back to Removing and Replacing Parts
I/O port card
Dell™ Latitude™ E6410/E6410 ATG Service Manual
Removing the I/O port card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
ATG port cover
(applicable on E6410 ATG computer only).
3.
Remove the
battery
.
4.
Remove the
optical drive
.
5.
Remove the
hard drive
.
6.
Remove the
hinge covers
.
7.
Remove the
access panel
.
8.
Remove the
coin-cell battery
.
9.
Remove the
Heat Sink and Processor fan
.
10.
Remove the
LED cover
.
11.
Remove the
keyboard
.
12.
Remove the
display assembly
.
13.
Remove the
palm rest
.
14.
Remove the
modem
.
15.
Remove the
modem connector
.
16.
Remove the
ExpressCard cage
.
17.
Remove the
palm rest
.
18.
Remove the
system board
.
19.
Remove the screw that secures the I/O port card to the computer.
20.
Lift the left edge of the I/O port card and remove the I/O port card from the computer.
Replacing the I/O port card
To replace the I/O port card, perform the above steps in reverse order.
Back to Removing and Replacing Parts
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe
®
Flash
®
Player from
Adobe.com
in order to view the illustrations below.
Содержание Latitude E6410
Страница 6: ...Back to Contents Page ...