Back to Removing and Replacing Parts
Power Connector
Dell™ Latitude™ E6410/E6410 ATG Service Manual
Removing the Power Connector
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
ATG Port Cover
(applicable on E6410 ATG computer only).
3.
Remove the
battery
4.
Remove the
Memory
.
5.
Remove the
ExpressCard
.
6.
Remove the
optical drive
.
7.
Remove the
hard drive
.
8.
Remove the
hinge covers
.
9.
Remove the
access panel
.
10.
Remove the
Latitude ON™ Flash/CMG module
.
11.
Remove the
WWAN card
.
12.
Remove the
WLAN card
.
13.
Remove the
coin-cell battery
.
14.
Remove the
LED cover
.
15.
Remove the
keyboard
.
16.
Remove the
Fingerprint Reader
.
17.
Remove the
Display Assembly
.
18.
Remove the
ExpressCard cage
.
19.
Remove the
palm rest
.
20.
Remove the
system board
.
21.
Unthread the power source cable from the computer.
22.
Lift up the power source port to remove from the computer.
Replacing the Power Connector
To replace the power connector, perform the above steps in reverse order.
Back to Removing and Replacing Parts
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe
®
Flash
®
Player from
Adobe.com
in order to view the illustrations below.
Содержание Latitude E6410
Страница 6: ...Back to Contents Page ...