manualshive.com logo in svg

Dell Latitude E5410, Руководство по обслуживанию, Страница: 23 / 81

Поделиться
Скачать
Dell Latitude E5410 Скачать руководство пользователя страница 23

Back to Contents Page

  

Memory compatibility error

2.

If two modules are installed, remove one and test. Try the 
other module in the same slot and test. Test the other slot 
with both modules.  

3.

Replace the memory.  

4.

Replace the system board.  

ON-FLASH-ON

 

Memory is detected but has 

errors

1.

Reseat the memory.  

2.

If two modules are installed, remove one and test. Try the 
other module in the same slot and test. Test the other slot 
with both modules.  

3.

Replace the memory.  

4.

Replace the system board.  

OFF-FLASH-FLASH

 

Modem error

1.

Reseat the modem.  

2.

Replace the modem.  

3.

Replace the system board.  

FLASH-FLASH-FLASH

 

System board error

1.

Replace the system board.  

FLASH-FLASH-OFF

 

Option ROM error

1.

Reseat the device.  

2.

Replace the device.  

3.

Replace the system board.  

OFF-ON-OFF

 

Storage device error

1.

Reseat the hard drive and optical drive.  

2.

Test the computer with just the hard drive and just the optical 
drive.  

3.

Replace the device that is causing the failure.  

4.

Replace the system board.  

FLASH-FLASH-ON

 

Video card error

1.

Replace the system board.  

Содержание Latitude E5410


















































































Отзывы:

Нет отзывов