support.dell.com
Dell Latitude CPt V-Series/CPx H-Series Service Manual
29
Do not force the LCD flex cable into the connector. If you have trouble,
check to make sure the LCD flex cable is folded correctly and try again.
6. Lay the LCD panel in the top cover.
7.
Connect the two-wire back-light plug to the connector on the inverter.
When the plug is all the way in the connector, the key slot in the center of
the plug should
not
be visible. If you can see the key slot, the plug is not in
the connector correctly. Pull the plug out, turn the plug over, and reinsert it
into the connector.
8. Reinstall the four 5-mm screws to secure the LCD panel to the top cover.
,
"
1.
Remove the display assembly bezel.
2. Remove the LCD panel.
3. Remove the display assembly latch by unsnapping the latch and captive
spring from the inside of the display assembly top-cover assembly
(see Figure 14).
-
The palmrest assembly consists of the touch pad and the palmrest.
'
)+) ,)
%
+) ,"&
