18
Dell Latitude CPt V-Series/CPx H-Series Service Manual
6!!#22
8. Disconnect the keyboard cable from the connector on the system board.
The keyboard cable is the wide, flexible cable.
9. Carefully disconnect the track stick cable from the ZIF connector on the
palmrest’s flexible printed circuit (FPC).
10. Remove the keyboard assembly.
To replace the keyboard assembly, perform the following steps.
5&&&
1.
Place the keyboard on the left side of the computer with its key face down
(see Figure 11).
2. Connect the track stick cable to the ZIF connector.
Ensure that the contact side of the cable is down when you insert the
cable into the ZIF connector.
3. Connect the keyboard cable to the connector on the system board.
4. Carefully turn the keyboard over and fit the keyboard into place.
Ensure that the track stick and keyboard cables are not twisted as you
lower the keyboard into the palmrest.
keyboard cable
track stick cable
