support.dell.com
Dell Latitude CPt V-Series/CPx H-Series Service Manual
27
7.
Fold the LCD flex cable at the crease shown in Figure 16, so the name of
the LCD panel manufacturer faces up.
The connectors on the Torisan and Sharp LCD panels are mounted in the
reverse of each other. This means that pin 1 on the Torisan panel connector
is at the opposite end when compared to pin 1 on the Sharp panel
connector. Both panels have the same connector, but the connector is
mounted differently.
The LCD flex cable can connect to either panel by making one fold to the
cable. The words
Torisan
and
Sharp
are printed on the cable (see
Figure 16). If you are installing a Torisan LCD panel, fold the cable at the
crease so the word
Torisan
is facing up. If you are installing a Sharp LCD
panel, fold the cable at the crease so the word
Sharp
is facing up.
/ 1 &8),
To replace the 12.1-inch display LCD panel inverter, perform the following
steps:
1.
Find the manufacturer’s name on the back of the LCD panel that is to be
installed.
The manufacturer is either Torisan or Sharp.
#=2
#
=2
2. Ensure that the inverter’s configuration jumpers are set correctly (see
Figure 17).
If you are installing a Sharp LCD panel, both jumpers are used. If you are
installing a Torisan LCD panel, the bottom jumper is used. See the sticker
on the inverter shield for more information.
Fold for a Sharp LCD Panel
Fold for a Torisan LCD Panel
crease
(on top)
crease
(underneath)
curled back to connect to panel
LCD manufacturer name
