Display Assembly, Display Latch, and Hinge Covers: Dell Latitude C540/C640 Service Manual
1 rubber screw covers
(6)
5 M2 x 4-mm screws (5)
2 M2.5 x 5-mm screws
(6)
6 display-feed flex cable
3 display bezel
7 flex-cable retention bracket
4 top cover
8 display panel
Removing the Display Bezel
NOTICE:
Disconnect the computer and any attached devices from electrical outlets,
and remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE:
Read "
Preparing to Work Inside the Computer
" before performing the
following procedure.
1. Remove the
hard drive
.
2. Remove the
display assembly
.
3. Use a plastic scribe to pry the six rubber screw covers out of the screw holes located
on the front of the bezel.
4. Remove the six M2.5 x 5-mm screws located on the front of the bezel.
NOTICE:
Carefully separate the bezel from the top cover to avoid damage to the
bezel.
5. Starting at the bottom of the display panel (by the Dell™ logo), use your fingers to
separate the bezel from the top cover by lifting the inside of the bezel while pushing
in on the outside.
Removing the Display Panel
NOTICE:
Disconnect the computer and any attached devices from electrical outlets,
and remove any installed batteries.
file:///F|/Service%20Manuals/Dell/Latitude/c540-640/display.htm (5 of 12) [2/28/2004 7:57:51 AM]