Dell Latitude 7380 Скачать руководство пользователя страница 64

Страница: 64 / 74

Option

Description

Unobtrusive
Mode

This option, when enabled, pressing Fn+F7 turns off all light and sound emissions in the system. To
resume normal operation, press Fn+F7 again. This option is disabled by default.

Miscellaneous
Devices

Allows you to enable or disable various on board devices:

●

Enable Camera

—enabled by default

●

Enable Secure Digital(SD) Card

—enabled by default

●

Secure Digital(SD) Card read only mode

●

Secure Digital(SD) Card boot

Video screen options

Option

Description

LCD Brightness

Allows you to set the display brightness depending up on the power source (On Battery and On AC).

NOTE:

The video setting will be visible only when a video card is installed into the system.

Security screen options

Option

Description

Admin Password

Allows you to set, change, or delete the administrator (admin) password.

NOTE:

You must set the admin password before you set the system or hard drive password. Deleting

the admin password automatically deletes the system password and the hard drive password.

NOTE:

Successful password changes take effect immediately.

Default setting: Not set

System
Password

Allows you to set, change, or delete the system password.

NOTE:

Successful password changes take effect immediately.

Default setting: Not set

Mini SATA SSD-2
Password

Allows you to set, change or delete the password on the mini card Solid State Drive (SSD).

NOTE:

Successful password changes take effect immediately.

Default setting: Not set

Strong Password

Allows you to enforce the option to always set strong passwords.

Default Setting: Enable Strong Password is not selected.

NOTE:

If Strong Password is enabled, Admin and System passwords must contain at least one

uppercase character, one lowercase character and be at least 8 characters long.

Password
Configuration

Allows you to determine the minimum and maximum length of Administrator and System passwords.
Minimum is 4 characters and maximum is 32 characters.

Password Bypass

Allows you to enable or disable the permission to bypass the System and the Internal HDD password,
when they are set. The options are:

●

Disabled

●

Reboot bypass

Default setting: Disabled

Password
Change

Allows you to enable the disable permission to the System and Hard Drive passwords when the admin
password is set.

Default setting:

Allow Non-Admin Password Changes

is selected.

System setup

Содержание Latitude 7380











































































Результаты поиска

Содержание Latitude 7380

Отзывы:

Похожие инструкции для Latitude 7380

Бренды по названию

Популярные бренды

Dell Latitude 7380, Руководство пользователя

Результаты поиска

Содержание Latitude 7380

Отзывы:

Похожие инструкции для Latitude 7380

Бренды по названию

Популярные бренды