Dell Latitude 7380 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 74

background image

Option

Description

UEFI boot path
security

These options control whether or not the system will prompt the user to enter the Admin password (if
set) when booting a UEFI boot path from F12 boot menu:

●

Always, except internal HDD

(default)

●

Always

●

Never

Date/Time

Allows you to change the date and time.

System Configuration screen options

Option

Description

Integrated NIC

This option controls the on-board LAN controller.

●

Disabled - The internal LAN in off and not visible to the operating system.

●

Enabled - The internal LAN is enabled.

●

Enabled w/PXE

-The internal LAN is enabled with PXE boot (default).

SATA Operation

Allows you to configure the internal SATA hard-drive controller. The options are:

●

Disabled

●

AHCI

●

RAID On: This option is enabled by default.

Drives

Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:

●

SATA- 2

●

M.2 PCI-e SSD-0

SMART
Reporting

This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. This
option is disabled by default.

●

Enable SMART Reporting

USBConfiguratio
n

This is an optional feature.

This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to
boot any type of USB Mass Storage Devices (HDD, memory key, floppy).

If USB port is enabled, device attached to this port is enabled and available for OS.

If USB port is disabled, the OS cannot see any device attached to this port.

The options are:

●

Enable USB Boot Support (by default enable)

●

Enable External USB Port (by default enable)

Dell Type-C dock
configuration

Allows you to enable option- Always Allow Dell Docks.

●

When set to enabled, allows connection to the Dell WD and TB family of docks (Type-C docks)
independent of USB and Thunderbolt Adapter configuration settings.

●

When set to disabled, the docks will be controlled via the USB and Thunderbolt Adapter configuration
settings.

Thunderbolt
Adapter
configuration:

USB PowerShare

This field configures the USB PowerShare feature behavior. This option allows you to charge external
devices using the stored system battery power through the USB PowerShare port. By default, the

Enable USB PowerShare

is disabled.

Audio

This field enables or disables the integrated audio controller. By default, the

Enable Audio

option is

selected. The options are:

●

Enable Microphone (by default enabled)

●

Enable Internal Speaker (by default enabled)

System setup

63

«
...
61
62
63
64
65
...
»

Содержание Latitude 7380











































































Отзывы:

Нет отзывов

Похожие инструкции для Latitude 7380

Бренд: Hatteland Страницы: 44

POWERMATE ENTERPRISE - 10-1997

Бренд: NEC Страницы: 270

Бренд: Gateway Страницы: 50

FocusPRO 6000 Series

Бренд: Honeywell Страницы: 64

X-Superteam XPS-100

Бренд: Honeywell Страницы: 40

Бренд: Honeywell Страницы: 69

Бренд: Honeywell Страницы: 39

Бренд: Honeywell Страницы: 78

Бренд: Honeywell Страницы: 39

Бренд: Honeywell Страницы: 133

Бренд: Honeywell Страницы: 159

Бренд: Honeywell Страницы: 180

Бренд: Honeywell Страницы: 198

Бренд: XtendLan Страницы: 65

Integrated Touchscreen Computer J2 650

Бренд: J2 Страницы: 78

Бренд: Moxa Technologies Страницы: 57

Бренд: JNC Страницы: 58

Бренд: Rikomagic Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды