3. Disconnect the battery cable from the connector on the system board.
4. To remove the PCIe SSD:
a. Loosen the M2 x3 captive screw that secures the SSD bracket [1].
b. Remove the SSD bracket [2].
c. Slightly lift the SSD and pull out from its connector
Installing PCIe SSD
1. Insert the PCIe SSD card into the connector.
2. Install the SSD bracket over the PCIe SSD card.
NOTE:
When installing the SSD bracket, ensure that the tab on the bracket is held securely with the tab on the palm
rest.
NOTE:
Ensure to install the bracket is the system is shipped with bracket.
3. Tighten the M2 x 3 screws to secure it the SSD bracket.
4. Connect the battery cable to the connector on the system board.
5. Install the
.
After working iinside your computer
18
Disassembly and reassembly
