Back to Contents Page
System Board Assembly
Dell™ Latitude™ E6500 Service Manual
Removing the System Board Assembly
Replacing the System Board Assembly
The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label on the bottom of the computer. The replacement kit for the
system board includes media that provides a utility for transferring the Service Tag to the replacement system board.
Removing the System Board Assembly
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance.
1.
Follow the instructions in
Before Working on Your Computer
.
2.
Close the display and turn the computer over.
3.
Remove the bottom of the base assembly (see
Removing the Bottom of the Base Assembly
).
4.
Remove the Mini-Card from the WWAN/FCM card slot, if present (see
Removing a WWAN Card
or
Removing an FCM
).
5.
Remove the Mini-Card from the WLAN/WiMax card slot, if present (see
Removing a WLAN/WiMax Card
).
6.
Remove the hinge covers (see
Removing the Hinge Covers
).
7.
Remove the Mini-Card in the WPAN/UWB/FCM card slot, if present (see
Removing a WPAN/UWB Card
or
Removing an FCM
).
8.
Remove the hard drive (see
Removing the Hard Drive
).
9.
Disconnect the coin-cell battery cable from the system board (see Removing the Coin-Cell Battery).
10.
Remove the memory modules (see
Removing a Memory Module
).
11.
Remove the processor thermal-cooling assembly (see
Removing the Processor Thermal-Cooling Assembly
).
12.
Remove the processor (see
Removing the Processor Module
).
13.
Remove the fan (see
Removing the Fan
).
14.
Remove the optical drive (see
Removing the Optical Drive
).
15.
Remove the display assembly (see
Display
).
16.
Remove the keyboard (see
Removing the Keyboard
).
17.
Remove the speaker/fingerprint reader cover (see
Removing the Right- Speaker and Fingerprint Reader Cover
).
18.
Remove the palm rest assembly (see
Removing the Palm Rest Assembly
).
19.
Remove the card cage (see
Removing the Card Cage
).
20.
Disconnect the power cable.
21.
Disconnect the Secure Digital card cable from the system board.
22.
Disconnect the ExpressCard cable from the system board.
23.
Disconnect the I/O daughter card cable from the system board.
24.
Remove the five M2.5 x 5-mm screws labeled with white arrows from the system board.
25.
Pull out on the top left corner of the base assembly to release the power, USB, and serial connectors.
Содержание Latitiude E6500
