Dell Latitiude E6500 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 72

background image

8.

Turn the computer top-side up.

9.

Open the display to 90-degrees and lift the display assembly off the base assembly.

Replacing the Display Assembly

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance.

1.

Align the display hinges with the holes in the base of the computer and lower the display into place.

2.

Replace the two each M2.5 x 5-mm screws on the hinges.

3.

Close the display and turn the computer over.

4.

Route the display cable and wireless (WLAN, WWAN, and WPAN) cables, and fit the cables under each tab in the cable routing channels, including the
tabs on the rear of the assembly.

5.

Connect the WWAN antenna cables to the WWAN card and place any unused antenna cables in the base assembly cable holders next to the card slot.

6.

Connect the WPAN antenna cable to the WPAN card and place any unused antenna cables in the base assembly cable holders next to the card slot.

7.

Connect the WLAN antenna cables to the WPAN card, and place any unused antenna cables in the base assembly cable holders next to the card slot.

8.

Connect the display cable to the display cable connector on the system board.

9.

Replace the hinge covers (see

Replacing the Hinge Covers

).

10.

Replace the bottom of the base assembly (see

Replacing the Bottom of the Base Assembly

).

11.

Replace the battery (see

Replacing the Battery

).

Removing the Display Bezel

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance.

1.

Follow the instructions in

Before Working on Your Computer

.

2.

Remove the display assembly (see

Removing the Display Assembly

).

1 display assembly 2 base assembly

CAUTION:

After unrouting cables, position the cables to the rear and away from the base assembly before installing the display assembly.

«
...
18
19
20
21
22
...
»

Содержание Latitiude E6500









































































Отзывы:

Нет отзывов

Похожие инструкции для Latitiude E6500

Бренд: IBM Страницы: 2

Бренд: IBM Страницы: 5

Бренд: IBM Страницы: 6

600E - ThinkPad 2645 - PII 400 MHz

Бренд: IBM Страницы: 222

TRS-80 Model 100

Бренд: Radio Shack Страницы: 28

TRS-80 Model 100

Бренд: Radio Shack Страницы: 230

Бренд: Orbic Страницы: 33

TravelMate 5335

Бренд: Acer Страницы: 313

TravelMate 5740

Бренд: Acer Страницы: 314

Extensa 5430 Series

Бренд: Acer Страницы: 176

TravelMate 7750G

Бренд: Acer Страницы: 2286

Бренд: HP Страницы: 22

Armada 1500c Series

Бренд: HP Страницы: 36

6830s - Compaq Business Notebook

Бренд: HP Страницы: 36

Бренд: HP Страницы: 3

Бренд: HP Страницы: 12

8710p - Compaq Business Notebook

Бренд: HP Страницы: 42

Бренд: HP Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды