Dell Inspiron 7501 Скачать руководство пользователя страница 71

Страница: 71 / 83

Table 11. Security (continued)

Option

Description

Upper Case Letter

When enabled, this field reinforces password must contain at least one upper
capital letter.

Lower Case Letter

When enabled, this field reinforces password must contain at least one lower
capital letter.

Digit

When enabled, this field reinforces password must contain at least one-digit
number.

Special Character

When enabled, this field reinforces password must contain at least one special
character.

NOTE:

These options by default are disabled.

Minimum
Characters

Defines the number of characters allowed for a password. Min = 4

Password Bypass

Allows you to bypass the System password and the Internal hard drive password, when it is set, during a
system restart.

The options are:

•

Disabled

—This option is enabled by default.

•

Reboot bypass

Password Changes

Allows you to change the system password and hard drive password without the need of administrator
password.

Enable Non-Admin Password Changes

- By default, this option is disabled.

Admin Setup Lockout

Allows the administrator to control how the user can access BIOS setup.

Enable Admin Setup Lockout

- By default, this option is disabled.

NOTE:

• If the admin password is set and Enable Admin Setup Lockoutis enabled, you cannot

view the BIOS setup (using F2 or F12) without the admin password.

• If the admin password is set and Enable Admin Setup Lockoutis disabled, the BIOS

setup can be entered and items that are viewed in Locked mode.

Master Password Lockout

Allows you to disable master password support.

Enable Master Password Lockout

- By default, this option is disabled.

NOTE:

The Hard Disk password has to be cleared before the settings can be changed.

Update and Recovery

Table 12. Update and recovery

Option

Description

UEFI Capsule Firmware
Updates

Allows you to update the system BIOS through UEFI capsule update packages.

Enable UEFI Capsule Firmware Updates

- By default, this option is enabled.

BIOS Recovery from Hard
Drive

Allows you to recover BIOS on the primary hard drive or USB drive in corrupted conditions.

BIOS Recovery from Hard Drive

- By default, this option is enabled.

NOTE:

BIOS Recovery from hard drives is not available for Self-Encrypting Drives (SED).

System setup

Содержание Inspiron 7501




















































































Результаты поиска

Содержание Inspiron 7501

Отзывы:

Похожие инструкции для Inspiron 7501

Бренды по названию

Популярные бренды

Dell Inspiron 7501, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 7501

Отзывы:

Похожие инструкции для Inspiron 7501

Бренды по названию

Популярные бренды