Steps
1. Align the solid-state drive bracket to accommodate the M.2 2280 solid-state drive.
2. Replace the single (M2x3) screw to secure the solid-state drive to the palm-rest and keyboard assembly.
3. Place the solid-state drive module shield.
4. Replace the single (M2x3) screw to secure the solid-state drive module shield to the palm-rest and keyboard assembly.
Next steps
1. Install the
.
2. Follow the procedure in
after working inside your computer
.
Replacing the SSD-1 support bracket
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
or
About this task
The figure provides a visual representation of the replace procedure.
Removing and installing components
27
