Dell Inspiron 7501 Скачать руководство пользователя страница 69

Страница: 69 / 83

Table 9. Power Management (continued)

Option

Description

•

Cool

•

Quiet

•

Ultra Performance

USB Wake Support

Enable USB Wake
Support

Allows you to enable USB devices to wake the system from standby mode.

By default, the option

Enable USB Wake Support

is disabled.

Wake on Dell USB-
C Dock

Allows you to connect a Dell USB-C Dock to wake the system from standby
mode.

By default, the option

Wake on Dell USB-C Dock

is enabled.

NOTE:

These features are only functional when the AC power adapter is connected. If the

AC power adapter is removed before Standby, the BIOS removes power from all USB ports
to conserve battery power.

Block Sleep

This option enables you to block entering to sleep (S3) mode in operating system environment. By
default, the

Block Sleep

option is disabled.

NOTE:

When Block Sleep is enabled, the system does not go to sleep. Intel Rapid Start

gets disabled automatically, and the operating system power option will be blank if it was
set to Sleep.

Lid Switch

Allows the system to power on (from AC adapter or by system battery) from off state whenever the lid
is opened.

Power On Lid Open

—enabled by default.

Intel Speed Shift
technology

Allows you to enable or disable the Intel Speed Shift Technology support. By default,

Intel Speed Shift

technology

is enabled. Enabling this option allows the operating system to select appropriate processor

performance.

Security

Table 10. Security

Option

Description

Intel Software Guard
Extensions

Provides a secure environment for running code/storing sensitive information in the context of the main
operating system and sets enclave reserve memory size.

Intel SGX

The options are:

•

Disabled

•

Enabled

•

Software Control

—This option is enabled by default.

Intel Platform Trust
Technology

Allows you to control whether Intel Platform Trust Technology (PTT) feature is visible to the operating
system.

Intel Platform Trust Technology On

— This option is enabled by default.

NOTE:

Disabling this feature does not change any settings or information stored in PTT.

PPI Bypass for Clear
Command

Allows you to control the Trusted Platform Module (TPM).

PPI Bypass for Clear Command

- This option is disabled by default.

Clear

Allows you to clear the PTT owner information and return PTT to the default state.

System setup

Содержание Inspiron 7501




















































































Результаты поиска

Содержание Inspiron 7501

Отзывы:

Похожие инструкции для Inspiron 7501

Бренды по названию

Популярные бренды

Dell Inspiron 7501, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 7501

Отзывы:

Похожие инструкции для Inspiron 7501

Бренды по названию

Популярные бренды