Replacing the heat sink
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
CAUTION:
Incorrect alignment of the heat sink can damage the system board and processor.
NOTE:
If either the system board or the heat sink is replaced, use the thermal pad/paste provided in the kit to ensure that
thermal conductivity is achieved.
Procedure
1
Align the screw holes on the heat sink with the screw holes on the system board.
2
In sequential order (as indicated on the heat sink), tighten the four captive screws that secure the heat sink to the system board.
Post-requisites
1
Replace the
2
Replace the
.
27
44
Replacing the heat sink
Содержание Inspiron 7390 2n1
