Dell Inspiron 5584, Руководство по обслуживанию

Страница: 42 / 140

Identifier GUID-1876A74B-D56A-47F2-8EDF-F2F19004C8B8
Status Released
Replacing the solid-state drive/Intel Optane
memory module
Enable the Intel Optane memory after you replace the Intel Optane memory module. For more information about enabling the Intel Optane
memory, see
Enabling Intel Optane memory .
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer . After working inside your computer, follow the instructions in After working inside
your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
Identifier GUID-A96B7432-A437-43C5-9DA5-2C247C41FA8F
Status Released
Procedure to move the M.2 screw mount
This computer supports two M.2 card form factors:
• M.2 2230
• M.2 2280
If you are replacing the M.2 card with a different form factor, perform the following procedure to move the M.2 screw mount to another
location that accommodates the new form factor. If the replacement card is of the same form factor as the one previously installed, skip
this procedure.
1 Remove the screw (M2x3) that secures the M.2 screw mount to the palm-rest and keyboard assembly.
2 Lift the M.2 screw mount out of the slot on the palm-rest and keyboard assembly.
3 Turn the screw mount 180 degrees.
4 Place the M.2 screw mount into the other slot on the palm-rest and keyboard assembly.
5 Replace the screw (M2x3) that secures the M.2 screw mount to the palm-rest and keyboard assembly.
17
42 Replacing the solid-state drive/Intel Optane memory module