manualshive.com logo in svg

Dell Inspiron 5584, Руководство по обслуживанию

Поделиться
Скачать
Dell Inspiron 5584 Скачать руководство пользователя страница 135

Identifier

GUID-EE9A5D95-88BE-4EE7-983E-D97C680BDECD

Status

Released

Enhanced Pre-Boot System Assessment (ePSA) 

diagnostics

CAUTION: 

Use the ePSA diagnostics to test only your computer. Using this program with other computers may cause invalid 

results or error messages.

The ePSA diagnostics (also known as system diagnostics) performs a complete check of your hardware. The ePSA is embedded with the 
BIOS and is launched by the BIOS internally. The embedded system diagnostics provides a set of options for particular devices or device 
groups allowing you to:

•

Run tests automatically or in an interactive mode

•

Repeat tests

•

Display or save test results

•

Run thorough tests to introduce additional test options to provide extra information about the failed device(s)

•

View status messages that inform you if tests are completed successfully

•

View error messages that inform you of problems encountered during testing

NOTE: 

Some tests for specific devices require user interaction. Always ensure that you are present at the computer terminal 

when the diagnostic tests are performed.

Identifier

GUID-0B893EED-EFBC-4831-A9C4-7298A7A9F619

Status

Released

Running the ePSA diagnostics

1 

Turn on your computer.

2 

As the computer boots, press the F12 key as the Dell logo appears.

3 

On the boot menu screen, select the 

Diagnostics

 option.

4 

Click the arrow at the bottom left corner.
Diagnostics front page is displayed.

5 

Click the arrow in the lower-right corner to go to the page listing.
The items detected are listed.

6 

To run a diagnostic test on a specific device, press Esc and click 

Yes

 to stop the diagnostic test.

7 

Select the device from the left pane and click 

Run Tests

.

8 

If there are any issues, error codes are displayed.
Note the error code and validation number and contact Dell.

Identifier

GUID-F7E24B39-9988-47A8-8C7B-4F85BA0CF5DD

Status

Released

System diagnostic lights

Battery-status light

Indicates the power and battery-charge status.

Solid white

 — Power adapter is connected and the battery has more than 5 percent charge.

Troubleshooting

135

Содержание Inspiron 5584













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды