Dell Inspiron 5584 Скачать руководство пользователя

Страница: 131 / 140

Identifier

GUID-4D6759B1-4017-4F54-87E6-9153B9D6E101

Status

Released

System setup

NOTE:

Depending on the computer and its installed devices, the items listed in this section may or may not be displayed.

Identifier

GUID-E8E05C46-BC9D-4CF1-AC84-34B87FDCCFB7

Status

Released

System setup

CAUTION:

Unless you are an expert computer user, do not change the settings in the BIOS Setup program. Certain changes can

make your computer work incorrectly.

NOTE:

Before you change BIOS Setup program, it is recommended that you write down the BIOS Setup program screen

information for future reference.

Use the BIOS Setup program for the following purposes:

•

Get information about the hardware installed in your computer, such as the amount of RAM and the size of the hard drive.

•

Change the system configuration information.

•

Set or change a user-selectable option, such as the user password, type of hard drive installed, and enabling or disabling base devices.

Identifier

GUID-1432A924-49E9-4080-961D-2AFBDAF42039

Status

Released

Entering BIOS setup program

Turn on (or restart) your computer.

During POST, when the DELL logo is displayed, watch for the F2 prompt to appear, and then press F2 immediately.

NOTE:

The F2 prompt indicates that the keyboard is initialized. This prompt can appear very quickly, so you must watch

for it, and then press F2. If you press F2 before the F2 prompt, this keystroke is lost. If you wait too long and the
operating system logo appears, continue to wait until you see the desktop. Then, turn off your computer and try again.

Identifier

GUID-7A7EB30A-4A48-422B-AE30-B8DC236A1790

Status

Released

Navigation keys

NOTE:

For most of the System Setup options, changes that you make are recorded but do not take effect until you restart the

system.

Keys

Navigation

Up arrow

Moves to the previous field.

System setup

131

Содержание Inspiron 5584













































































































































Результаты поиска

Содержание Inspiron 5584

Отзывы:

Похожие инструкции для Inspiron 5584

Бренды по названию

Популярные бренды

Dell Inspiron 5584, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 5584

Отзывы:

Похожие инструкции для Inspiron 5584

Бренды по названию

Популярные бренды