Dell Inspiron 3480 Скачать руководство пользователя страница 130

Страница: 130 / 138

Security

Password Bypass

Bypass the System (Boot) Password and the internal HDD password prompts during
a system restart.

Password Change

Enable or disable changes to the System and Hard Disk passwords when an
administrator password is set.

Non-Admin Setup Changes

Determines whether changes to the setup option are permitted when an
administrator password is set.

UEFI Capsule Firmware Updates

Enable or disable BIOS updates through UEFI capsule update packages.

PTT Security

Enable or disable Platform Trust Technology (PTT) visibility to the operating system.

Computrace(R)

Enable or disable the BIOS module interface of the optional Computrace(R) Service
from Absolute Software.

Admin Setup Lockout

Enable to prevent users from entering Setup when an Admin Password is set.

Master Password Lockout

Disables the master password support. Hard Disk passwords need to be cleared
before changing the setting.

SMM Security Mitigation

Enable or disable the SMM Security Mitigation.

Table 7. System setup options—Secure Boot menu

Secure Boot

Secure Boot Enable

Enable or disable the secure boot feature.

Secure Boot Mode

Modifies the behavior of Secure Boot to allow evaluation or enforcement of UEFI
driver signatures.

Expert Key Management

Enable or disable Expert Key Management.

Custom Mode Key Management

Select the custom values for expert key management.

Table 8. System setup options—Intel Software Guard Extensions menu

Intel Software Guard Extensions

Intel SGX Enable

Enable or disable Intel Software Guard Extensions.

Enclave Memory Size

Set the Intel Software Guard Extensions Enclave Reserve Memory Size.

Performance

Multi Core Support

Enable multiple cores.
Default: Enabled.

Intel SpeedStep

Enable or disable Intel Speedstep Technology.
Default: Enabled.

NOTE:

If enabled, the processor clock speed and core voltage are adjusted

dynamically based on the processor load.

C-States Control

Enable or disable additional processor sleep states.
Default: Enabled.

Intel TurboBoost

Enable or disable Intel TurboBoost mode of the processor.
Default: Enabled.

HyperThread control

Enable or disable HyperThreading in the processor.

130

System setup

Содержание Inspiron 3480











































































































































Результаты поиска

Содержание Inspiron 3480

Отзывы:

Dell Inspiron 3480, Руководство по обслуживанию, Страница: 130 / 138

Результаты поиска

Содержание Inspiron 3480

Отзывы: