Dell Inspiron 3420 Скачать руководство пользователя

Страница: 107 / 119

Table 15. System setup options—System Management menu (continued)

System Management

Wake on LAN

Enable or disable the system to power on by special LAN signals when it
receives a wakeup signal from the WLAN.

By default, the

Disabled

option is selected.

Auto on Time

Enable to set the system to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.

By default, the option is disabled.

Table 16. System setup options—Keyboard menu

Keyboard

Numlock Options

By default, the Numlock option is enabled.

Fn Lock Options

By default, the Fn lock option is enabled.

Lock Mode

By default, Lock Mode Secondary is enabled.

Keyboard Illumination

Enables to change the keyboard illumination settings.

By default, the

Bright

option is enabled.

Keyboard Backlight Timeout on AC

Set the timeout value for the keyboard backlight when an AC adapter is
connected to the system.

By default, the

1 minute

option is enabled.

Keyboard Backlight Timeout on
Battery

Set the timeout value for the keyboard backlight when the is running only on
battery power.

By default, the

1 minute

option is enabled.

Table 17. System setup options—Pre-boot Behavior menu

Pre-boot Behavior

Adapter Warnings

Enable Adapter Warnings

Enable or disable the warning messages during boot when the adapters with
less power capacity are detected.

By default, the option is enabled.

Warning and Errors

Enable or disable the action to be done when a warning or error is encountered.

By default, the

Prompt on Warnings and Errors

option is enabled.

USB-C Warnings

Enable Dock Warning Messages

By default, the option is enabled.

Fastboot

Enable to set the speed of the boot process.

By default, the

Thorough

option is enabled.

Extend BIOS POST Time

Set the BIOS POST time.

By default, the

0 seconds

option is enabled.

MAC Address Pass-Through

Replaces the external NIC MAC address with the selected MAC address from
the system.

By default, the

System Unique MAC Address

option is enabled.

BIOS setup

107

Содержание Inspiron 3420
























































































































Результаты поиска

Содержание Inspiron 3420

Отзывы:

Похожие инструкции для Inspiron 3420

Бренды по названию

Популярные бренды

Dell Inspiron 3420, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 3420

Отзывы:

Похожие инструкции для Inspiron 3420

Бренды по названию

Популярные бренды