Dell Inspiron 3420 Скачать руководство пользователя

Страница: 102 / 119

Table 8. System setup options—Storage menu (continued)

Storage

Port Enablement

This page allows you to enable the onboard drives.

By default, the

SATA-1

option is enabled.

By default, the

M.2 PCIe SSD-1

option is enabled.

SMART Reporting

Enable SMART Reporting

Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during system startup.

By default, the

Enable SMART Reporting

option is disabled.

Drive Information

SATA-1

Type

Displays the SATA type information of the system.

Device

Displays the SATA device information of the system.

M.2 PCIe SSD-1

Type

Displays the M.2 PCIe SSD type information of the system.

Device

Displays the M.2 PCIe SSD device information of the system.

Enable Hard Drive Free Fall
Protection

Enable Hard Drive Free Fall Protection

Allows you to enable Hard Drive Free Fall Protection feature.

By default, the

Enable Hard Drive Free Fall Protection

option is selected.

Enable MediaCard

Enable or disable the media card in read-only state.

By default, the

Secure Digital (SD) Card

option is enabled.

Table 9. System setup options—Display menu

Display

Display Brightness

Brightness on battery power

Enable to set screen brightness when the system is running on
battery power.

Brightness on AC power

Enable to set screen brightness when the system is running on
AC power.

Touchscreen

Enable or disable touchscreen for the operating system.
Touchscreen will always work in the BIOS setup irrespective
of this setting. This option is enabled by default.

EcoPower

Enable EcoPower

Enable or disabled EcoPower feature. This option is enabled by
default.

Full Screen Logo

Enable or disable full screen logo.

By default, the option is disabled.

Table 10. System setup options—Connection menu

Connection

Network Controller Configuration

Integrated NIC

If enabled, UEFI network protocols are installed and available, allowing pre-OS
and early OS networking features to use any enabled NICs. The option

Enable

with PXE

is enabled by default.

102

BIOS setup

Содержание Inspiron 3420
























































































































Результаты поиска

Содержание Inspiron 3420

Отзывы:

Похожие инструкции для Inspiron 3420

Бренды по названию

Популярные бренды

Dell Inspiron 3420, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 3420

Отзывы:

Похожие инструкции для Inspiron 3420

Бренды по названию

Популярные бренды