Removing and Replacing Parts : Dell Inspiron 2500 Systems
b. Use the microprocessor extraction tool to remove the microprocessor module.
c. To remove the microprocessor module, pull the module straight up. Do not bend the pins.
Replacing the Microprocessor Module
NOTICE:
After replacing the microprocessor module, update the BIOS using a flash BIOS update program
floppy disk or CD that came with the replacement microprocessor.
NOTICE:
Proper seating of the microprocessor module does not require
force.
NOTICE:
A microprocessor module that is not properly seated can result in an intermittent connection and
subsequent failures.
1. Align the pin-1 triangle on the microprocessor toward the pin-1 triangle in the socket, insert the
microprocessor into the socket, and move it around slightly until you feel it settle into the socket.
When the microprocessor module is correctly seated, all four corners are aligned to the same height. If one
or more corners of the module are higher than the others, the module is not seated correctly.
2. Tighten the cam lock screw.
NOTICE:
Do not over or under tighten the screw. Tighten it until the screw indicator points to the "closed"
or "locked" indicator on the socket.
3. Replace the microprocessor thermal cooling assembly.
4. While pressing lightly down on the center of the retaining clip, insert a pry stick into the latch mechanism
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...hecked%20ok/Inspiron/2500/2500%20SM/remove.htm (32 of 46)6/21/2004 12:45:37 AM
