Dell Inspiron 16 5625, Руководство по обслуживанию

Страница: 50 / 73

12. Replace the two screws (M2x4) that secure the Type-C port-bracket to the system board.
13. Connect the power-adapter port cable to the system board and replace the adhesive tape on the cable.
14. Connect the display cable to the system board, close the latch of the display cable connector and replace the clear adhesive
tape on the display cable connector.
15. Close the right display hinge and align the screw holes on the right display hinge with the screw holes on the system board.
16. Replace the three screws (M2.5x5) that secure the right display hinge to the palm-rest and keyboard assembly.
Next steps
1. Install the heatsink .
2. Install the wireless card .
3. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive , whichever is applicable.
4. Install the memory module .
5. Install the base cover .
6. Follow the procedure in After working inside your computer .
Power-button board
Removing the power-button board
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
About this task
The following image(s) indicate the location of the power-button board and provides a visual representation of the removal
procedure.
Steps
1. Remove the two screws (M2.5x5) that secure the right display hinge of the display assembly to the system board.
2. Open the right display hinge at an angle of 90 degrees.
50 Removing and installing components